Expo-par is a component of the exposure triangle. The exposure triangle is the ratio of three values ​​to obtain a correctly exposed (illuminated) frame. (excerpt, diaphragm, ISO).

Mostly in photography, the term “Expopara«.

Expopara in photography

Exposure in photography is a classic combination of aperture and exposure parameters. With the advent of digital cameras, the third parameter that can be changed "on the fly" is the photosensitivity of the camera matrix. Installation expo-pairs is based on the set light sensitivity of the material, in turn, all three parameters (more relevant for digital photography) form an exposure triangle. V expo couple includes:

  • Exposure - the time for which it opens gate.
  • Aperture - Relative aperture size lensthrough which the width of the light beam (illumination) is dosed.

Exposure triangle

It includes the following concepts:

  • exposure - a parameter that calculates the amount of light that the camera's light material will receive.

The correct exposure is selected in order to obtain the required amount of light on the photographic material during exposure (exposure of photographic material), and is calculated as the product of illumination and shutter speed.

  • Exposure - the time for which it opens gate.

The shorter excerpt, the less light hits the camera sensor.

  • Diaphragm - the size of the relative aperture lensthrough which the width of the light beam (illumination) is dosed.

Than already diaphragm, the narrower the beam of light going to the matrix.

  • Sensor sensitivity (ISO).

How much light can it take matrix per unit of time (how much to be exposed). The higher the value, the more "noise" it emits matrix, or light-sensitive material (manufacturing restrictions). In cameras it is defined as ISO - the standard for measuring photosensitivity, which replaced the "outdated" German DIN.

expo-pair

Expo-par in the exposure triangle

Imagine a window with movable shutters. The aperture will be the size of the window - the larger the opening, the more light enters the room. Speed shutter Is the amount of time for which the shutters are open. The longer they are open, the more light comes in. When you are in the room, wear glasses, thereby reducing the sensitivity of your eyes to light (low value ISO). There are several ways to increase the light in the room - open the shutters wider, remove glasses, or increase the size of the window opening (.

Realities

In photography, all parameters are linked and form their own triangle. By increasing the sensitivity of the matrix, we get the ability to reduce the speed shutterto get a clearer picture and "capture", for example, moving objects in low light. Also, to achieve the same effect, you can either open the aperture or change the speed shutter.

Steps

In photography, “stop” or “step” is a common concept. In the context of the entire system, an increase in parameters by one "stop" means a 2-fold change in the amount of light transmitted to the matrix. To adjust the system as a whole (as well as to each individual parameter), a step equal to a foot or its part is applicable. Usually this is either 1/2 or 1/3 of a stop. Can be changed as a parameter of an individual organ (speed shutter, photosensitivity of the matrix, aperture opening), and the entire triangle as a whole - depends on the current camera setting.

For example, if you hear that you needed to increase the exposure by 1 stop, this means that you needed to capture twice as much light as you got in the photo.

Since the parameters of the triangle individually have different units of measurement, a unified method for comparing the parameters was invented - the use of stop-steps.

upload exposure liveviewer.ru 3

Interchangeability

The same illumination of the matrix can be obtained by different paired combinations of other parameters (exposure coupler) - increasing the shutter speed by one stop while simultaneously closing it by the same aperture value will not change the exposure. This property is called the law of reciprocity (Bunsen-Roscoe).

Aperture and excerpt bound by the golden rule. To maintain the correct exposure with one ISO - you need to either close the aperture and increase the shutter speed, or open the aperture and decrease the shutter speed.

Photography Courses:

Add a comment

Your email address will not be published.